30 Connecting to the BMC with address 10.2.3.4 failed. Error (21212)
Error (21212)
Connecting to the BMC with address 10.2.3.4 failed.
Recommended Action
Check network connectivity or the management controller board state.
If the above error is coming then you need to go into the iDRAC and change the below parameters under the “Network settings”.
IPMI Settings [enable the checkbox]
Attribute | Value | ||
Enable IPMI Over LAN |
IPv4 Settings [enable the checkbox, update all the below fields]
Attribute | Value | ||
Enable IPv4 | |||
DHCP Enable | |||
Static IP Address | |||
Static Gateway | |||
Static Subnet Mask | |||
Use DHCP to obtain DNS server addresses | |||
Static Preferred DNS Server | |||
Static Alternate DNS Server |
Common Settings [enable the checkbox]
Attribute | Value | ||
Register iDRAC on DNS | |||
DNS iDRAC Name | |||
Auto Config Domain Name | |||
Static DNS Domain Name |